BLUE-KOTE will cure to a tough protective plastic film, which can be easily peeled off by hand when no longer required. BLUE-KOTE is a water based liquid coating that can be applied by airless spray, conventional air spray (may require thinning with water), or by brush or roller. Clean up BLUE-KOTE as you would with other water based paints. Clean up with water.
Primary used to protect fibreglass parts and moulds. Protects boat decks, hulls, hull liners, tubs, showers, plastic parts and most non-porous surfaces from paint, plaster, sealants, resins, polyurethane foam and abrasives during construction, storage, assembly, transportation and repair. BLUE-KOTE has been used to protect the following surfaces: Gel coat, Acrylic, Polycarbonate, Glass, Aluminum and Stainless Steel. BLUE-KOTE is not recommended for coating raw mild steel
Light blue viscous liquid when wet, translucent blue film when cured
(Sq. Ft/mil of dry film/gal.) 540, Weight (pounds per gallon) 9.0, Storage Life (In closed container) 6 Mo. @ 80degrees F, Minimum film forming temperature 50degrees F. Recommended dry film thickness-6 to 8 mils, weight 10lb
Products are furnished in carton of 4-1 gallon pails, in 5-gallon plastic pails, and 55-gallon drums. 330 gallon disposable containers also available
AIRLESS SPRAY APPLCATION:
NOTE: this product has been formulated to provide optimum coat coverage without running or sagging on vertical surfaces with airless spray equipment.
Airless spray equipment capable of generating a fluid pressure of 2000-2500 pounds. Select the tip size suitable for your application and equipment capabilities. Adjust the fluid pressure to achieve proper atomization and spray pattern
BRUSH AND ROLLER APPLICATION
Brush or poll on as heavy a coat as possible moving in one direction and allow to dry. A Second coat may be required. Apply the second coat perpendicular to the first to obtain a strong, uniform film.
- DO NOT allow product to freeze. Frozen product cannot be rejuvenated and will not function properly.
- DO NOT apply to surfaces other than those specifically noted prior to thoroughly testing.
- DO NOT apply the coating too thin. This will result in a weak discontinuous film, which will be difficult to remove and offer no protection.
- DO NOT apply this product in the rain, moisture or freezing temperatures before it can fully cure.
- WARNING! CONTAINS MODIFIED ACRYLIC LATEX AND AMMONIA. DO NOT ALLOW TO FREEZE! KEEP OUT OF THE REACH OF CHILDREN. DO NOT TAKE INTERNALLY.
BK-1: Blue-Kote single gallon
BK-2: Blue-Kote two gallon
BK-5: Blue-Kote 5 gallon case
Blue-Kote R-18 is a water based, air or forced dry, hand peel-able, U.V. resistant, temporary protective coating. When applied to most non-porous surfaces (glass, porcelain, fiberglass, gel coat, aluminum and stainless steel) the coating provides protection from abuse. Do not use R-18 on acrylic due to high adhesion.
R-18 minimizes surface damage during assembly, rigging, shipment, installation, and subsequent construction or rehab work. Paint, sealants, abrasives and chemicals are kept away from protective surface. Just prior to final inspection, the coating is easily peeled from the surface. In addition to forming an extremely tough film R-18 exhibits quick dry times and good water resistance when fully cured.
Blue-Kote paint is a viscous light blue liquid.
(SQ. FT/MIL OF DRY FILM/GALLON): 786, POUNDS PER GALLON: 8.9 + 0.2., COATING V.O.C., (EPA Method 24): 0 G/L or 0.0 Lb/Gallon.
STORAGE LIFE (IN CLOSED CONTAINER):
6 Mo. at recommended temps.
MINIMUM FILM FORMING TEMPERATURE:
50 degrees F.
R-18 is supplied ready to use for roll-on, brush,air or airless spray application in 1 gallon pails (4 per case), 5 gallon pails, or 55 gallon drums.
Store at temperatures above 50 degrees F. and below 110 degrees F.
RECOMMENDED DRY THICKNESS
4 to 8 mils.
Air cure time will vary depending on wet film thickness and atmospheric conditions (temperature, air velocity, and relative humidity). Optimizing these conditions will decrease dry times. Consult your product representative for further information
PRODUCT USE INSTRUCTIONS
The following directions and recommendations are intended to serve as a guide and may require modification to meet local conditions. No Mixing required. Use as received. Do not thin. The intended substrate must be clean and dry to accept the protective coating properly. Loose debris, or dust, or other contamination may degrade product effectiveness and peel-ability.
AIRLESS SPRAY APPLICATION
Airless spray equipment capable of generating a fluid pressure of 2000-2500#. Select a tip size suitable for your application and equipment capabilities. Adjust the fluid pressure to achieve proper atomization and spray pattern.
CONVENTIONAL AIR SPRAY APPLICATIONS
Conventional air spray equipment may be used. Some products may require the use of a larger fluid nozzle and/or thinning with water to spray. Note that the addition of water will require you to apply more material to obtain the desired dry film thickness and will increase the time to dry the coating. Use as little water as possible.
ROLLER AND BRUSH APPLICATION
Roll or brush on as heavy a coat as possible in one direction and allow drying. A second coat may be required. Apply the second coat perpendicular to the first to obtain a strong, uniform film. Dry film build required in mil. 4 : 5 : 6 : 7 : 8 : 9 : 10 : 12. Wet mils. to apply 9 : 11 : 13 : 14 : 16 : 18 : 21 : 25. **Square feet of coverage 194 : 155 : 129 : 111 : 97 : 86 : 75 : 64. ** Theoretical Coverage-Actual coverage may be slightly lower due to transfer efficiency factors. Seller makes no warranty of any kind, express or implied, as to the merchantability, fitness for any particular purpose, or any other matter with respect to this product. Since conditions of use are beyond sellers’ control, buyer assumes all risk of use of this product. Sellers’ sole obligation will be to replace the product if found to be defective. It is the user’s responsibility to determine the suitability for use of this product under the conditions present at the time of application. M.S.D.S. available upon request.
NOTE: CONSULT MATERIAL SAFETY DATA SHEET FOR HANDLING AND SAFETY
Use with adequate ventilation.
DO NOT TAKE INTERNALLY. Avoid prolonged contact with skin. While spraying, wear a suitable respirator with an ammonia cartridge to prevent inhalation of over spray and vapors.
Keep containers closed when not in use.
DO NOT allow the product to freeze. Frozen liquid material cannot be rejuvenated and will not function properly.
DO NOT apply the product to other surfaces other than those specifically noted prior to thoroughly testing.
DO NOT apply the coating too thin! This will result in a weak discontinuous film,which will be difficult to remove and offer no protection.
DO NOT apply the coating when it will be exposed to rain, moisture or freezing temperatures before it can fully cure.
DO NOT attempt to peel the coatings at extreme temperatures. They will peel easily at normal room temperature. Very high temperatures (more than 160 deg. F.) may cause the coating to fail.
DO NOT apply the coating over small, intricate or delicate parts. These areas should be masked with plastic film or tape as the coating may be difficult to remove.
WARNING! CONTAINS MODIFIED ACRYLIC LATEX. DO NOT ALLOW PRODUCT
Blue-Kote Carpet Mask is temporary carpet protection, Carpet mask uses a SOLVENT-BASED adhesive for easy unroll and apply to carpet. Resists puncturing, stays in place, easy removal, skid resistant & does not transfer adhesive to carpet.
Many companies are selling carpet protection these days, all claiming their film is the best. The fact is Carpet Mask out performs all these products. Solvent-based adhesive offers several significant advantages and protection from potential carpet damage to the user.
- Film is easy to unroll and apply to the carpet, saving you labor dollars.
- Solvent-based adhesives coat the film more evenly in the manufacturing process. This allows the film to adhere to the carpet evenly rather than having pockets of non-sticking film or “float” as is often the case with water-based products.
- Film will not break down with conditions of moisture as water-based films do.
So the next time you plan on purchasing a self-adhesive film to protect valuable carpeting, for the best protection for you and your carpet, think Carpet Mask.
CM-24S: Carpet-Mask Film 24” x 200’ (single)
Temporary floor protection.
Cost effective and safe for all surfaces, perfect for protecting concrete and epoxy floors, green (made from 100% recycled products and can be recycled).
Construction Board does not stain and can be reused, is durable enough for any job site, durable enough to drive a forklift over it and has earned USBGBC Certified Leed’s Points: material and resource credit 2.1 or 2.2
Rolls measure 38″ x 100′ (96.5cm x 30.5cm)
316 Square Feet (29.4 SqM)
Blue-Kote Engline Cowl film is a pressure sensitive rubber adhesive coated UV stabilized polyolefin masking film. Engine cowl film is designed for the protection of engine cowl finishes during rigging, service and under shrink wrap covers during transportation to prevent chafing and scratching to the painted surfaces. This film can be left on for 30-45 days without transfer of adhesive to the substrate
Cowl film is also used to protect acrylic surfaces from scratching and scuffs.
MCF-24S: Engine Cowl anti Scratch/Chafe film 24” x 200’ (SINGLE ROLL)
MCF-24: Engine Cowl anti Scratch/Chafe film 24” x 200’
MCF-48: Engine Cowl anti Scratch/Chafe film 48” x 200’
MCF-48s: Engine Cowl anti Scratch/Chafe film 48” x 200’ (SINGLE ROLL)
Blue-Kote Floor Mask is for use on hardwood and polished floors. The product is durable, reusable and simple to use. A Non-Adhesive, 100% non-woven runner has non-skid backing which stays put in short lengths. Blue-Kote Floor Mask is the perfect floor protection that also gives you a highly absorbent and easy to use surface cover.
FM-24NT: Floor-Mask non tack reusable 36” x 50’
FM-24s: Floor-Mask Film 24” x 200’ (single)
Poly-Craft Mask (R) consists of a three-ply protection system: a fiber glass mesh between a 40-point craft paper and a polyethylene sheet.
Water proof and tear resistant. Perfect for hardwood floors, tile, vinyl, marble, any surface where you used to use rosin paper. Quickly becomes a must-have product for quick on the job protection. 100 times stronger than rosin paper.
36″x200′ roll, 600 Square Feet
$78.60 1 to 3 rolls
$68.50 4 rolls & up per roll
PCM6-300 72″ x 300′ (1800 sq. ft.) wt 47 lb.
Poly-Craft mask joining tape:
Poly vinyl tape is used as a seam tape for Poly-Craft Mask. Also used to
secure mask to substrate (fiberglass, tile, marble and stainless steel.
Blue-Kote Professional Shoe and Boot Covers offers you the opportunity to take customer satisfaction to a new level and enhance your professional image with these high quality, vinyl or non-woven cloth non-skid shoe and boot covers.
- Universal size
- Keep decks and cockpits clean during assembly and service
- Keep carpets clean
- Marina boat showroom: customer boarding new boats
- Boat shows: customer boardings
- Final walk through on new home construction
- Showing custom homes, home inspections and real estate-open house
BCV-25: Vinyl Shoe Cover-25 Pairs/Box
BCC-25: Cloth Shoe Cover-25 Pairs/Box
BCV-50: Vinyl Shoe Cover-50 Pairs/Box
BCC-50:Cloth Shoe Cover-50 Pairs/Box
BCv-100: Vinyl Shoe Cover-100 Pairs/Box
BCC-100: Cloth Shoe Cover-100 Pairs/Box
100% virgin resin, true mil thickness’, maximum UV inhibitors designed to help save you time and money. Our Shrink Wrap offers UVI protection and strength. UVI is used for the protection from film deterioration and in combination with “Ethyl Vinyl Acetate” it contributes to the elasticity and puncture resistance of shrink wrap.
Our shrink wrap provides a tight smooth form fitting, heat sealed surface secured around your boat which will prevent water from pooling and protect your boats gel-coat finish from chafing that occurs from boats covered by tarps and canvas. It’s no secret that boats left exposed to harsh weather like Florida’s sun and rain will eventually deteriorate. Vandals, Birds, Insects and Rodents, Rain, Sun and Wind, Condensation, Mold, Mildew and Rust are stopped when your boat is shrink wrapped.Euroglass shrink wrapping keeps your boat in exactly the same condition as the day it was wrapped.With Almost 30 years in Shrink Wrap (since 1981) our Parent company Euroglass knows Shrink Wrap. There can be no dirtier and more dangerous place in the world, than among the busy cities and highways of America. Shrink wrap stops all these damaging problems before they can begin. A wind resistant, impenetrable form fitting, heat sealed surface, shrink wrap keeps your boat as clean as the day it was wrapped. Shrink wrap also provides security, keeping people off your boat whenever it stops along the way during transportation.
WARNING: Shrink wrap can burn. If heat is applied incorrectly, shrink wrap can ignite into open flame. It can also drop down onto other combustible material and cause secondary ignition and fire. If at any time you observe the shrink wrap on fire, immediately stop what you are doing and carefully inspect the area where you are working for possible fire. Keep a fire extinguisher available at all times. Tape/seal off fuel vents prior to covering! This is VERY important to prevent explosions; call the boat builder if vents cannot be found, some fuel vents are incorporated into the fuel cap.
Options are formatted by size and then thickness. This means that 17’x110′ shrinkwrap 7-mil will be listed as “17×110-7m“.
Polyethylene boat lift protective sling sleeve
6 mil white 16″ X 600′ and 18″ X 600′ rolls. Similar to shrink wrap material. Manufactured specifically for the protection of boat lift slings and boat hulls during launch and haul-out. Sling-Shield rinses clean, keeping dirt off lift slings. Simple 1 man installation.
16″ for standard boat lift slings.
18″ for slings with rub-rail pads.
You will need a Dispenser to use this product. They come in both 16′ and 18′ sizes.
SS166066: 8″ X 600′ roll, white, 6mil, 20lb.
SS166066: 16″ X 300′ roll, white, 6mil, 23lb.
SS186066: 16″ X 600′ roll, white, 6mil, 53.6lb.
SS166066: 18″ X 300′ roll, white, 6mil, 25.5lb.
SS186066: 18″ X 600′ roll, white, 6mil, 58.5lb.
SS366008: 36″ x 600′ roll, white, 8mil
SSHD16: 16″ Holder
SSHD18: 18″ Holder
Sling Shield Tape:
Sling-Shield tape is used to secure Sling-Shield to desired height on lift
slings. Resistant to aging, sun, water, fungus, oil, acids, alkalis and
Click here to View and Purchase Tape
Blue-Kote Window Mask is a translucent blue film used as protection for windows during painting, spray gel coat etc. 2mil polyethylene film coated with low-tack adhesive. Window Mask is a strong, linear low density, 2 mil. polyethylene film coated with a solvent-based, low-tack adhesive. This special formula allows Window Mask to also adhere to substrates such as plastics, finished metal and aluminum without any damaging effects upon removal.
Window-Mask Film 24” x 600’ (single)