Blue-Kote Tape

Blue-Kote Tape is a highly visible, tough, pressure sensitive 7 mil. blue vinyl threshold tape. It can be used for abrasion protection, duct sealing, joint sealing, decorating, packaging, aisle marking and threshold protection.Temporary product used to protect smooth, nonporous surfaces. Used for taping and masking under Blue-Kote temporary scratch protector. For protecting fiberglass and gel coat, door jambs, edges of dive platforms, stairs, etc.

Use on countertops, aluminum, vinyl and bathroom fixtures.

BKT-547: Blue-Kote Tape 1/2″ x 36 yds(108′)
BKT-552: Blue-Kote Tape 1″ x 36 yds(108′)
BKT-557: Blue-Kote Tape 2″ x 36 yds(108′)
BKT-562: Blue-Kote Tape 3″ x 36 yds(108′)
BKT-567: Blue-Kote Tape 4″ x 36 yds(108′)
BKT-572: Blue-Kote Tape 6″ x 36 yds(108′)
BKT-577: Blue-Kote Tape 8″ x 36 yds(108′)

 

Product Options
Combination of product variants is not available
Quantity

Price: $131.00

Loading Updating cart…

Heat Shrink Tape

Blue-Kote Heat Shrink Tape Contains No UV Inhibitors. Could leave an adhesive residue if applied directly to paint, fiberglass, etc. Use to tape vents and doors onto cover–and to repair holes in the shrinkwrap. A polyethylene film tape for convention center floor marking, seaming and splicing of polyethylene sheeting and general purpose holding. Tape features a low residue adhesive.

PRODUCT CHARACTERISTICS

  • Heat Skrink Tape specs: Total Thickness: 9 mils
  • Adhesion to Stainless Steel: 70 ounces per inch
  • Tensile Strength: 22 pounds per inch

HST60s15: Heat Shrink Tape (white) 1.5″ x 60yds(108′) single roll
HST60s: Heat Shrink Tape (white) 3″ x 60yds(108′) single roll
HST60b:Heat Shrink Tape (white) 3″ x 60yds(108′), 4 case lots, bulk price min. order of 4 cases
HST60: Heat Shrink Tape (white) 3″ x 60yds(108′), 16roll/case
HST6015: Heat Shrink Tape (white) 1.5″ x 60yds(108′), 32 roll/case

Product Options
Combination of product variants is not available
Quantity

Price: from $7.00

Loading Updating cart…

Poly Vinyl Tape

Sling Shield Tape:
Sling-Shield tape is used to secure Sling-Shield to desired height on lift
slings. Resistant to aging, sun, water, fungus, oil, acids, alkalis and
corrosive chemicals.
SST-553: 1.5″ X 36 yd. (108′) white or red $5.35 per roll.
SST-553case: Case of 32 rolls – $131.00
SST-60: 1.5″ X 60 yd. (108′) white or red $6.75 per roll.
SST-60case: Case of 32 rolls – $200.00

Poly-Craft mask joining tape:
Poly vinyl tape is used as a seam tape for Poly-Craft Mask. Also used to
secure mask to substrate (fiberglass, tile, marble and stainless steel. Will
not leave adhesive residue when removed. White other colors available special
order, 6 days

SST-557: 2″ X 36 yd. $6.05 per roll
SST-557case: 24 rolls per case $131.00 per case
SST-562: 3″ X 36 yd. $9.05 per roll
SST-562case: 16 rolls per case $131.00 per case

Product Options
Combination of product variants is not available
Quantity

Price: from $5.35

Loading Updating cart…

Preservation Tape

Blue-Kote Preservation Tape Contain UV inhibitors for long term storage. Product will not leave adhesive residue if applied directly to fiberglass, paint, graphics, etc.

Hull preservation tape and is used for taping edges of shrink wrap to a boat’s hull. It has a polyethylene film and rubber based adhesive. UV protected for prolonged expose to sunlight. Preservation tape features residue free removal from most surfaces. Preservation Tape is used to seam shrink wrap film sheeting together, patch holes in the shrink wrap, secure the wrap, and to hold doors in place. Tape comes with serrated edges for easy tearing with no cutting needed.

PRODUCT CHARACTERISTICS

  • Total Thickness: 7 mils
  • Adhesion to Stainless Steel: 40 ounces per inch
  • Tensile Strength: 22 pounds per inch

PST-36s: Preservation Tape 3″ x 36 yds(108’), SINGLE ROLL
PST-36: Preservation Tape 3″ x 36 yds(108’), 16 roll/case

Product Options
Combination of product variants is not available
Quantity

Price: from $15.60

Loading Updating cart…

Travel-Tak

Blue-Kote Anti-chafe film is a maximum adhesion that is easy peel off with NO adhesive residue or transfer. Travel-Tak also provides UV protection. Used to protect gel coat, painted hulls and graphics, from rub and chafe marks as well as dirt and grime.

This film is two sheets of high quality PE welded together to make an extremely durable plastic that can withstand high winds and UV exposure. The adhesive is a natural rubber base which allows maximum adhering strength and easy peel off with no adhesive transferring

*200′ rolls can be cut to desired widths saving inventory of multiple sizes, less waste

TK-6s: Travel-Tak anti-chafe film 6″ x 200’ (single)
TK-12s: Travel-Tak anti-chafe film 12″ x 200’ (single)
TK-24s: Travel-Tak anti-chafe film 24″ x 200’ (single)
TK-48s: Travel-Tak anti-chafe film 48″ x 200’ (single)
TK-6: Travel-Tak anti-chafe film 6″ x 200’, 4 roll case
TK-12: Travel-Tak anti-chafe film 12″ x 200’, 4 roll case
TK-12b: Travel-Tak anti-chafe film 12″ x 200’, 8 per case, bulk rate, min. order of 8
TK-48: Travel-Tak anti-chafe film 48″ x 200’, 4 roll case

Product Options
Combination of product variants is not available
Quantity

Price: from $19.35

Loading Updating cart…
LoadingUpdating…